Ninja NJ600 Use and Care Manual download pdf (Page 2)

NOTE: This unit has a short power supply

cord to reduce the risk resulting from

becoming entangled in or tripping over

a long cord. An extension cord may be

used if you are careful in its use:

1. The electrical rating of the extension

cord should be at least as great as the

electrical rating of the appliance.

2. An extension cord with the power cord

must be arranged so that it will not drape

over the countertop or tabletop where

they can be pulled on by children or

tripped over accidentally.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL

APPLIANCES, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS

BE FOLLOWED, INCLUDING THE

FOLLOWING:

READ ALL INSTRUCTIONS

BEFORE USING YOUR NINJA

™

PROFESSIONAL BLENDING SYSTEM.

POLARIZED PLUG

WARNING: To reduce the risk of

electric shock, this appliance has a

polarized plug (one blade is wider

than the other). This plug will ﬁt into

a polarized outlet only one way. If the

plug does not ﬁt fully into the outlet,

reverse the plug. If it still does not

ﬁt, contact a qualiﬁed electrician to

install the proper outlet. DO NOT

modify the plug in any way.

14. To reduce risk of injury, never place the

blade assembly on base without pitcher

properly attached.

15. DO NOT operate this appliance on or near

any hot surfaces (such as gas or electric

burner or in a heated oven).

16. The use of attachments or accessories

not recommended by the manufacturer

may result in ﬁre, electric shock or

personal injury.

17. DO NOT remove the pitcher from the

motor base while the blender is in

operation.

18. To reduce the risk of injury, NEVER

operate the appliance without the lid in

place; DO NOT try to defeat the interlock

mechanism; make sure that the cutting

blades are properly installed before

operating the appliance.

19. DO NOT expose pitcher to extreme

temperature changes.

20. Exercise extreme caution when blending

hot liquids.

21. CAUTION: Do not process food or liquid

that is hotter than 180°F / 82°C. Allow

very hot ingredients to cool before

processing.

22. DO NOT overﬁll.

23. Extreme caution must be used when

moving an appliance containing hot food,

water or other liquids.

24. When processing hot liquids, open the

pouring spout cap.

25. DO NOT operate the appliance empty.

26. Always allow the appliance to cool before

taking off parts and before cleaning.

27. If the appliance overheats, a thermal

switch will become activated and shut off

the motor. To reset, unplug the appliance

and let it cool down for approximately 10

minutes before using again.

28. THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use

this appliance for anything other than its

intended use. Do not use outdoors.

1. To protect against electrical shock, do not

submerge the blender or allow the power

cord to come into contact with water or

any other liquid.

2. Close supervision is necessary when any

appliance is used by or near children.

3. Never leave an appliance unattended

when in use.

4. Turn the appliance Off and remove the

power cord from the electrical outlet

when not in use, before assembling or

disassembling parts and before cleaning.

To unplug, grasp the plug and pull from

the electrical outlet. Never pull from the

power cord.

5. DO NOT abuse the power cord. Never

carry the appliance by the power cord

or yank it to disconnect from electrical

outlet; instead grasp the plug and pull to

disconnect.

6. DO NOT operate any appliance with

a damaged cord or plug, or after the

appliance malfunctions, has been

dropped or damaged in any manner.

Return the appliance to EURO-PRO

Operating LLC for examination, repair or

adjustment.

7. DO NOT let the power cord hang over

the edge of table or counter or touch hot

surfaces such as the stove.

8. Always use appliance of a dry, level

surface.

9. Keep hands, hair, clothing, as well as

utensils out of container while blending to

reduce the risk of severe injury to persons

or damage to the appliance. A scraper

may be used but only when the blender is

not running.

10. CAUTION: Blade assembly is sharp,

handle with care. When handling the

blade assembly, always hold by the shaft.

11. Avoid contact with moving parts.

12. DO NOT attempt to sharpen blades.

13. DO NOT use the appliance if blade

assembly is bent or damaged.

www.ninjakitchen.com

2 3

TOLL FREE: 1-800-798-7398

1 2 3 4 5 6 7 ... 10 11

Comments to this Manuals

No comments

Ninja NJ600 Use and Care Manual Page 2

Comments to this Manuals